Go-Dive
1.5 Litre Green (Argon)
Cylinder
25mm Cylinder Valve
Over
Pressure Relief Valve
You may also like to look
at
Pony
Clamps
and
Apeks
First Stage Regs
|
gdz0169
 |
Argon bottle
Regulator £64.99
A
compact first stage regulator that can be used on any 200 BAR DIN valve.
Measuring only 2 3/8-inches (6 cm) tall, this is the most compact suit
inflation regulator available. It has an unbalanced piston first stage
with an intermediate pressure of 120 psi and includes an over pressurization
valve.
NOTE:
The Argon Bottle Drysuit Inflation Regulator is designed for drysuit inflation
only. It is not designed, tested or intended for breathing use. |
 |
Argon bottle
Mount £27.99
For
divers who use argon gas for drysuit inflation or carry a small bottle
of spare air, our Argon Bottle Mount carries one 6-cubic foot or one 13-cubic
foot tank. Designed to attach along 1-inch (2.54 cm) D-rings of the TransPac
backplate or along perimeter holes of aluminum or steel backplates, the
Argon Bottle Mount can be attached to either side of the backplate and
behind the diver's arm. A quick release buckle allows the bottle to be
removed, if necessary, during a dive. |
|
